You can make a drinker for chickens yourself

A wet chicken is an unpleasant sight, a wet chicken is dangerous, it can die. Do-it-yourself drinking bowl for chickens is the only option to keep dry bedding in the chicken coop. The drinking bowl will allow you to always provide your bird with fresh, clean water.

What should be a drinking bowl for chickens

Each chick drinks 2 times more water than feed. The chicken needs 0.5 liters of water per day. At the same time, the bird tries to dominate. She climbs with her feet into a bowl of food, into a basin of water. As a result, the food is trampled, and dirt and litter float in the water. At poultry farms, nipple drinkers have been provided, and why are dacha chickens worse? Let's try to introduce them to hygiene by replacing ordinary basins with drinking bowls for chickens.

The main condition is that you can dip only your nose or catch droplets in a do-it-yourself drinking bowl for chickens. This condition is met:

siphon;
nipple;
vacuum;
cup drinkers.

The device does not allow chickens to walk in the water, and dirt is brought in only by their noses. What to do with this chicken! You will have to wash the container more often. There are certain requirements for drinking bowls for chickens:

It is necessary to provide for an automatic water supply so that the drinker is filled during the day. It is good if the device is attached to a wall or raised on a stand.
The device must be lightweight and strong so that it does not injure the bird in the event of a fall. A secure fit will prevent overturning and spilling water.
Manufacturing material - food grade plastic, interior painting. There should be no sharp edges.
The container should be well washed from the sediment at the bottom.

How to make a vacuum drinker yourself

1-bank; 2- liquid; 3 - cup; 4 - creating a gap.

There are many devices based on glass jars of different capacities. A vessel turned upside down is used, from which water flows out as the bowl in which it is immersed is emptied.Water is retained due to the difference in pressure on the surface of the saucer and inside the bottle, in the upper part. When the level in the cup has dropped, an air bubble enters the bottle, which allows a certain amount of water to pour out. Even a child can make such a drinker with his own hands. A do-it-yourself drinking bowl for chickens, the photo of which is in front of you, does not require an explanation of how to make it.

However, the chicken, a curious, restless bird, likes to occupy high places. Therefore, more than one Corydalis will perch on the jar, they will arrange fights without rules on it, and soon the jar will lie on its side, it's good if it's whole. We'll have to find a more stable design for do-it-yourself chickens.

When using plastic drinkers, it is important that the rim of the bowl is rimmed or has a protective rubber rim on it. Chickens can scratch themselves on the sharp edge, and then pecking will begin.

Water bottles are used throughout the farm. It is not difficult to find them, in each courtyard several such items stand in a secluded corner of the closet. The dishes are light, transparent and easy to use.

Let's make a drinking bowl for chickens from plastic bottles. An ordinary plastic basin with high sides is taken. They will just be at the level of the chicken's neck. A hole is made in the bottle at a level of 15 cm from the bottom, and when filled, it is lowered into a basin. The water will drain out, fill the gap between the container and the sides of the pan and stay just above the hole.

They drank the water, the level in the basin dropped, a hole in the wall of the bottle was exposed. In the boule-boule way, air will enter the bottle, the pressure of the air bubble will change and the water will fill the basin. A five-liter bottle is enough for 10 chickens a day.

The best device for a two-bottle autodrinker for chickens will be a device, the manufacture of which can be found in the video:

For those who do not have the opportunity to see, we will describe the device. We take 2 water bottles of different sizes. You can 8 and 5 liters, you can 5 and 3. They must have plugs. We cut off a large bottle like a saucer for water, more than 15 cm high, but so that the bird is comfortable to drink. Turn the second bottle over and connect the plugs inserted one into the other in any way. A hole is drilled on the body of a small bottle below the edges of the bowl.

The bottle is poured with water, the cork is screwed on top together with the bowl. The hole is held in place with a finger and the container fits into the wall holder. The hole opens, the bowl is filled with water, a vacuum is created at the top. A drinking bowl for chickens from plastic bottles is ready. The suspension must be done at the bottom, fix the bottle with a clamp from above.

How to make a drinking bowl for chickens from a sewer pipe can be seen in the figure. This is an open drinker, and so that the chickens do not swim, it should be located at the level of the back. Holes are cut in the pipe, like troughs, with bridges. The material is easily cut with a hot knife. Install tees with plugs along the edges - additional elements, buy together with the pipe. The pipe can be connected to the water supply and filled through the tap. Drainage with damper serves to clean the trough.

Nipple drinker

The example of automatic feeding, economy and hygiene are nipple drinkers for chickens. Water can be in various containers, including a bucket, the main one is a dropper, working on a chicken command. Therefore, the simplest nipple system represents a suspended bucket with nipples protruding from the bottom. The device can be powered by a storage tank or be flowing.

It takes a little skill in plumbing and patience. But the drinking bowl will be no worse than those used in poultry farms. From materials and tools you need to prepare:

Nipples, 3600 are needed for young animals and chickens, and 1800 for adult chickens, this indicator is shown by the service sector.
Plastic pipe, square or round, but with internal grooves and a wall thickness of 22 mm.
End caps, with an adapter for connecting to the mains.
Flexible hose for liner.
Pipe canopy clamps.
9mm drill and 1/8-inch tap.

It does not matter which pipes are installed on the drinker, the installation process is carried out in the sequence:

pipe marking;
holes are drilled from the side of the grooves;
the thread is cut;
nipples are screwed in;
the ends are closed;
droplet eliminators are installed;
the structure is attached to the wall;
water is supplied.

We will build an automatic drinking bowl for chickens with our own hands according to the drawing:

You need to get nipples, but it's better to take European ones right away, they are more reliable. It is not difficult to buy a plastic pipe and assembly equipment. The tube is plugged from the ends, marked under the nipples. They should be located after 30 cm. It remains to drill holes, cut the threads and screw in the nipples with sealing tape or tow. Check the tightness of the connections and supply water from the container through the embedded hose.

Saucers made from the bottoms of plastic bottles can serve as a drop catcher. These lightweight cups will allow the bedding to remain dry if the nipple is passed. As you can see from the diagram, the nipple should be under the water mirror.

The system requires additional automation if the nipple drinking pipe is flowing. The installation must include a pressure regulator. But the water will not be stagnant, fresh.

There is no way to describe all the designs of automatic drinkers for chickens invented by folk craftsmen. It is up to you to decide in relation to arrangement of a chicken coopwhich drinker is better.

Drinking bowl with dispenser - video

poultry homemade