Field of application of the Texas cultivator
The Russian market of gardening equipment is being mastered by foreign models. Texas cultivators represent a Danish company of the same name. Since 1960, the manufacturer has been developing a narrow direction and has succeeded in this. Texas gardening equipment is made with special care for the farmer. Cultivators and walk-behind tractors of the company work reliably.
Service maintenance of equipment by the company
Breakdowns of equipment operating in severe conditions are classified:
- engine breakdown;
- failure of automation;
- failure of mechanical components.
It is these problems that will require contacting a service center.
When buying a Texas cultivator, you need to stock up on both branded gear lubricant and drive belts. Finding the BOM in the included manual is easy. The numbers and letters of the marking indicate the size and profile of the belt. The designation TEXAS A 41 1/2 13X1050Li is read, a V profile belt with a height of 8 mm and a wide part of 13 mm wide, reinforced with a cord thread, length 1050 mm. The markings are on the wider part of the ring, as indicated in the Texas cultivator instructions. The manual is translated into machine language, but the technical terms are clear.
In addition, in the instructions it is necessary to learn the rules for preparing the cultivator for work, the frequency of replacing the engine oil. Please note that the first change of crankcase oil is carried out after 5 hours of operation. You need to use the recommended fuel in the work, it differs in different models.
Spare parts for the Texas cultivator are purchased at service centers. They will be delivered, even if the model has been in operation for a long time and is out of production.
Characteristics of Texas cultivators
Manufacturers have provided for the release of equipment for different areas and depth of processing. Some models cope well with garden beds, while others are able to lift fallow areas with heavy soil. At the same time, the range of used attachments increases the sector of equipment use.
If the cultivator is buried in loose soil, reduce the throttle, put the wheels in the middle position, adjust the coulter.
Design features of Texas motor cultivators:
- the machine control panel is placed on the steering wheel of a special design with a comfortable grip;
- a lightweight rear console improves centering and reduces weight;
- an exclusive frame made it possible to lower the center of gravity, facilitate the operation of the device;
- the engine is placed above the cutters, the unit has become stable;
- there is a front bumper to protect the motor and transport wheels.
Constructive changes to the Texas cultivator added manufacturability to it. So, all devices have a reverse, no effort is required to pull out a buried car. Powerful cultivators process a wide strip of dense soil to a depth of 30 cm. All machines are chain-driven and equipped with reliable four-stroke engines. The disadvantage is the increased noise during work and burying the nose in soft soil.
Do not use a cultivator when cultivating meadows after felling.The sabers will surely break at the roots! Full load on the cutter can be applied after running in.
Varieties of cultivator models
The range of Texas equipment is divided according to the power of the units and the type of work performed. The Hobby series, as the name implies, is used in small areas with light soil. Lightweight cultivators are indispensable for preparing beds for root crops, decorating flower beds and digging greenhouse land.
Cultivator Texas Hobby 300 is small and daring. He will climb into any corner of the garden, process the trunk circle, cut the beds. Power equipment - American Briggs & Stratton engine, four-stroke, with combustion chamber 148 cm3, with a capacity of 2.6 kW. The design uses a chain reducer. The unit processes 38 cm to a depth of 18 cm. The unit weighs 28 kg and costs 21 thousand rubles.
The Texas 500 Hobby Cultivator, with a proprietary TG 485 engine, has a power of 2.3 kW. The design uses a worm-type gearbox. Such a unit will carry out deep moldboard-free loosening to a depth of 33 cm. The width of the processed strip is 50 cm. The set includes 6 saber cutters. The cost of the device is 15 thousand rubles.
At the same time, the model of this 500 V series is equipped with a powerful American 4.2 kW engine. Such a Texas cultivator uses attachments:
- weeder;
- rear hitch;
- hiller;
- weighting agent;
- rake.
High functionality almost did not add weight to the instrument, only 43 kg. Only 6 cutters are included with the cultivator. Attachments must be purchased separately.
The Lilli series includes a range of three tools - 532TG, 534 TG, 572 B. The power of the equipment in this series is influenced by the type and power of the installed motors. And the most powerful of them will be the Texas 620 cultivator, which means that the equipment is equipped with a strong motor and copes with the functions of a mini-tractor if equipped with awnings. Attachments from more powerful equipment, Futura and Vision walk-behind tractors are suitable for the Lilli series. The initial equipment of the units differs only in milling cutters, instead of pneumatic wheels on motoblocks.
Read the instructions for use carefully. Use only recommended additives and fuels.
The Texas 532 TG 620 cultivator can be equipped with a cart, seat, snow blower and other attachments.
Main technical indicators:
- output shaft power - 6.5 liters. from.;
- processing width - 100 cm;
- chain reducer in a steel case;
- belt drive;
- easy start system.
Another modification of this model, Lilli 532 B, has a depth of entry of the cutters of 21 cm with a strip width of about 85 m. There are models using the TG500 motor.
Discontinued, but there is a Texas 530 TG MY 13 PRC cultivator in retail chains. Reliable and the mechanism was replaced by an improved model. The product was assembled in China. The cultivator is equipped with a TG 500 Power Line engine with a combustion chamber volume of 163 cm3... In the original configuration, the width of the processed strip could be set 30-55 cm, but it was possible to lengthen the cutters up to 85 cm. The loosening depth is 32 cm. The model has no reverse, single-speed.
The Texas 601 cultivator is the most powerful of the units presented in the review. The complete set includes the TG 650V engine, with a liner volume of 196 cm3... With a width of 85 cm, the cutters deepen into the ground by 30 cm.The hero weighs 56 kg. The machine can work with any attachments.
For about six years I have had an assistant in a Texas cultivator-cultivator, four cutters. To be honest, I would not have bought it the second time, I have been finishing it all six years - first I put additional two cutters for better traction - if I do not push it, I don’t drive, I dig in. It didn't help, but the load on the axle and the mount increased. I took off two cutters, and on each cutter, where the planting pipe, I welded 4 blades 8x10, it turned out 16 pieces. Plowing has become better, but not much. I think to the ends of each blade of the cutter to check the small, pointed blades (there are on some cultivators) - I don't find another way out, can someone tell me. Happy plowing to everyone.
how to lubricate the chain on the Texas cultivator 532 tg
Texas 532 since 20074 cutters, yes, I have a site with a slight slope to the north west and the land is not maturing the same, but there was such a problem sometimes I wanted to bury myself, with cutters one blade from left to right changed places, the problem was solved, I put three cutters on each side and everything is fine , cultivates wider and the area is even. Now I will adapt it for installing a hiller and with it I will make furrows for other nozzles. Chain Oil There is a rubber plug on the right side at the top.
532th I have six cutters for the fifth year (complete set), two sections, in front of the house and behind it, 4i6sotok. If without rest, then in ... an extra hour you can plow. I am familiar with such a problem as burrowing, but on four cutters, on six, it rarely happens. On the extreme cutters, the knives are bent inward, I threw two knives from left to right and on the turn, thereby increasing the processing width by about 10 cm. I also reduced the speed of the cutters. At such speeds, the worms have no chance of surviving, as you know, it enriches the earth with humus and oxygen. The land after processing is flour, not a single pebble. I turned a new pulley onto the motor shaft. Native stands with a diameter of 60mm new 50mm. A small adjustment of the clutch cable and you're done. The turnover dropped from 180 to 95-100. As for the reviews, I think the pocket machine has never failed, it starts up with half a turn, there is a hinged one - a disc hiller, lugs, do it yourself.
Hello, Alexander. I also have mk Texas 532 Lili. Once again I am convinced that there are no bad cars, there are appropriate owners. Could you please send a drawing of the pulley
and which belt was installed after the pulley rework?
5 years ago we bought a Texas walk-behind tractor. The belt is out of order. The store where we bought is no longer there, we won't find a workshop either, and we won't be able to buy another walk-behind tractor - retirees Trouble - help
The service life of 4 years started up without problems the first time. Yesterday, working at idle, I sneezed once as if on a suction and continued to work smoothly, but it seemed to me that a little speed was added. After 3 minutes, I turned off the engine. About 15 minutes later I began to get a little "dull", there are not even sneezes. Unscrewed the spark there is no spark. Checked the candle works. The wire is high. whole. I thought the coil how to check.
There is a good online store for spare parts for Texas in Naberezhnye Chelny. I ordered a handle and a front gear belt. They sent it quickly and without cheating.
Can you link to this online store?
We do not provide links. Type in a search engine.
Black smoke comes out of the exhaust pipe. What could be the reason?
The oil must be topped up, there is practically no oil, because of this and the exhaust is like soot.
good day
Where to buy a piston in a set with rings on the Lilli 532 Texas TG (I cannot determine specifically further)
Look in specialized online stores.
Can't find it in specialized stores. ... The model is discontinued. Which kit might fit? What brand?
Texas 601 how does the oil in the gearbox change (it is drained, there is no drain plug), if it is there at all, is there a filler plug? Help how to drain and replace the instructions say 0.6 liters there.