Electric instantaneous water heater
Instantaneous electric water heater is a device that is designed to heat a small volume of water. With this heating device, you can comfortably wash the dishes, but it is practically impossible to take a comfortable shower or quickly fill the bathtub. Water heating temperature is from 40ABOUTFrom to 60ABOUTFROM.
Manufacturers produce models of water heaters with heating elements. They also produce models of devices with a heating coil. Some models are supplied with additional accessories, such as a dishwashing nozzle or a plastic tap with a massage attachment for comfortable hand washing.
The heating element can be a heating element with a magnesium anode, located inside the body of the water heater. Also, one or two metal plates can protrude into the heating elements. Such heating plates burn out very quickly and the water heaters fail.
Read on: electric instantaneous shower water heater!
Choice of instantaneous water heater
When choosing an instantaneous water heater, you need to pay attention to the warranty conditions, additional equipment, heating element and safety group.
It is very important that the water heater is equipped with a water supply sensor. This sensor allows you to automatically cut off the power supply to the heating elements.
This function saves energy and prevents the heating plates from being damaged and the plastic parts from melting. Some electric instantaneous water heaters are equipped with a thermometer to measure the temperature of the water and a display for adjusting it.
Installation of instantaneous water heater
For installation instantaneous electric water heater you need to remove the back cover of the device and set the heating element to a certain heating temperature. Then you need to mark the holes for attaching the electric water heater. The fastening bolts are supplied in two versions: plastic rivets or stainless steel buttons. In the first case, the water heater is installed using silicone velcro. To install on metal buttons, you need to drill holes with a punch or drill.
A shut-off valve must be installed at the cold water inlet. On the rear panel of the water heater, a hole is cut for a water circulation pipe, which is necessary to cool the plastic parts. A heat-resistant hose is installed at the hot water outlet. Next, a dishwashing tap is installed, which comes complete with a heater.