How to make a metal porch in the country with your own hands

In any private house, it is necessary to arrange a porch. An excellent option would be a metal porch. If you make a canopy, then it will protect the front door from snow and rain. You can also make a porch from other materials: concrete or wood. But thanks to the forged metal elements, you can make the porch unusual.

How to choose a metal porch

Without a beautiful entrance, the appearance of the house is lost. You can use only metal elements or make a porch with mixed materials. The product is designed in various styles that correspond to fashion trends. One of the most original and beautiful is the metal porch.

This material is versatile and suitable for modern or classic designs. When choosing a design, you should rely on the appearance of the house and site. The porch is necessary not only for entering the house, but also for protection from atmospheric precipitation. In addition, arrange comfortable chairs and have a great rest. The porch canopy is made of openwork elements made of metal, and then covered with roofing material. Ordinary wooden beams can be used.

Before starting installation, you should decide on the final look. To do this, you need to make a sketch. First of all, measurements are taken and transferred to the sheet. Then the stairs are sketched.

With the help of drawings of a metal porch, work is done much faster, and the amount of materials required is also determined in advance.

A metal porch ladder is a great option. If you use wood material, it will quickly darken and fungus will appear. This design requires constant care. Therefore, metal is considered the best material. Metal steps for porch are easier to clean. It is possible to make such a product yourself without special skills. The metal construction is stylish and airy.

Advantages and disadvantages

Consider the benefits of a metal porch:

1. High strength.
2. Ease of installation of the structure.
3. You can make an economical option or an elite class.
4. Long service life.
5. You can replace old structural parts without disassembling the entire porch.
6. Not exposed to temperature extremes.
7. You can easily disassemble the product and install it in a different location.
8. The metal frame for the porch can be combined with wooden steps.
9. Any design solution can be realized.

Despite the many advantages, there are some disadvantages:

1. It is necessary to treat the material against corrosion.
2. High cost, especially forged items.
3. After rain and snow, the metal steps for the porch become slippery.
4. Many people combine metal with other materials to reduce costs.

If you use multiple materials, you can get an inexpensive and beautiful design.

The device of the foundation under the porch made of metal

Before installing the porch, you need to make the foundation. To do this, follow these steps:

1. Pit construction.
2. Laying sand and crushed stone cushion. The thickness of the sand is 10 cm, and the gravel is 5 cm. The dimensions of the foundation should be 15 cm less than the size of the pillow.
3. Formwork device. The length of the board should be 20 cm, and the thickness - 2 cm. For the correct installation of the formwork, it is necessary to make a level from the rope, which is pulled over the pegs.Use only dry wood.
4. Install reinforcement into the formwork. It is necessary to use material of class A400 and diameter 12 mm. In each direction, a bunch of reinforcement should be made with a step of 20 cm.
5. Pouring concrete. It is necessary to leave 30 cm to the top, since with the further construction of the ladder, it should be located below the ground. After installing it, concrete should be poured to the required level.
6. After pouring the concrete, it is necessary to remove voids from it using an appropriate tool.
7. Cover the concrete with foil until dry. It is not recommended to touch the product for about 1 week. After that, carry out the following work.

Metal porch installation

You can make a porch from shaped pipes and metal corners. Pipes are usually reinforced to increase rigidity. If the porch is without a canopy, then you should choose the right material for the cover. A perforated sheet is perfect for this, on which water will not stagnate.

For a beautiful appearance, it is recommended to make the platform and steps from the same material.

A porch for a country house made of metal is made with an odd number of steps. The standard dimensions of the steps are: depth - 30 cm, width - 20 cm. For high stairs, it is necessary to make a railing 1 meter high. Secure them with anchor bolts or weld them.

Railings are needed for stairs with more than 3 steps.

For porches with a canopy, use a frame from a corner and a pipe. The bearing racks must be made of a profile with a cross section of at least 5 cm. To install the racks, you need to make a hole 0.5 m deep and fill it with concrete. The roof structure must be assembled at the bottom and then mounted on the struts. Secure it with welding or anchor bolts. Cover the welded porch for a summer residence with slate, professional flooring, polycarbonate, metal tiles or other roofing material.

In accordance with the design of the house, you should choose the material for the roof of the porch. If you weld the structure with your own hands, then it will look great in a house with a classic style. The canopy can be made in the form of a wave, a sphere, or made it sloping.

For a small porch, make a canopy in the form of a dome. It looks original and beautiful. If you combine the entrance to the house with a terrace, then make a large area for relaxation. And if it is glazed, then it will be suitable for any weather.

Metal ladder processing

After installing the ladder, it is necessary to treat it with protective compounds. But preparatory work should be done:

1. Surface grinding. All oxides that are on the metal must be removed for the durability of the coating. Grind the frame with a grinder or grinder.
2. All welding joints must be carefully ground to avoid injury in the future.
3. After high-quality grinding, degrease the frame with white spirit or kerosene.
4. It is necessary to apply a primer in 2 layers for a good adhesion of the paint and varnish composition.
5. After surface preparation, start painting. Several coats of paint are applied for a durable finish. For a more beautiful look, varnish the frame, but this is not necessary.

You need to buy a special paint for painting metal products.

It is not so easy to make a porch of metal yourself without experience. But if you have at least some idea and experience, then you can make a simple design. And if there is an assistant in this difficult matter, then it is not at all difficult to achieve excellent results and perform a unique porch design.

If desired and financially available, they order a metal structure and do the installation with their own hands and make a canopy. This option will cost a little more, but the entrance is attractive.

Metal porch for home - video