Interskol D-10 / 420E hammerless drill review

Drill Interskol D-10 / 420E is a hammerless tool with a universal keyless chuck. The power of the electric drill motor is 420 W, which is comparable in power to some impact drills. The chuck that comes with the drill is single-sleeve, which is very convenient for rack work. In terms of technical characteristics, the hammerless drill does not differ from more expensive dual-mode counterparts. Let's consider the technical characteristics of the electric drill in more detail.

Specifications

The chuck can hold drills with a diameter of 0.8 to 10 mm. The clamping range is adjusted using a button located on the side of the drill body. The power tool is equipped with a chuck speed regulator. The range of revolutions is from 0 to 3000 rpm. The drill is suitable for fine and pinpoint metal work. The maximum drilling diameter is 10 mm. The power tool is also used for woodwork. The maximum drilling diameter in wood is 20 mm. The drill can also be used to work on drywall. Light weight electric drills allows you to work with the tool for a long time. The approximate weight of the drill without a wire is 1275 g. The weight with the wire is 1435 g. The length of the electric drill wire is 3 m.

The drill is equipped with a reverse function and mechanical breakage protection.

The reverse is started using the button located on the rear panel of the handle. The power tool is equipped with a plastic hook. It is designed for storing the drill, as well as installing the drill on a vertical work surface. If the hook interferes during operation, it can be removed by disassembling the top panel of the case.

Electronic part device

Inside the housing, made of impact-resistant plastic, there is a starter and a copper-wound rotor. The rotor is rated at 1450 W. Two bearings are installed on the driven shaft. The gearbox is well lubricated. The role of the starter wiring is performed by copper wires. The starter is housed in a plastic cover that protects it from impact and damage if dropped.

Drill body "Interskol D-10 / 420E"

The drill body is very ergonomic. The drill does not vibrate even at maximum speed. There are no backlashes during operation. The handle of the drill is rubberized. An additional front handle is supplied. The body consists of two parts, which are held together by 12 bolts.