Review of chainsaws brand Druzhba

Chainsaw Friendship Workplace The first model of the Druzhba chainsaw was developed in 1953, and released in 1955. They were produced at machine-building plants in the cities of Biysk and Perm. All models of these chainsaws have an air-cooled, two-stroke, single-cylinder engine with a carburetor. Thanks to its convenient design and high performance, Friendship is still in demand, and the saws of the first models are also in working order. The main purpose of the Druzhba chainsaw is felling and sawing logs.

Before operating any chainsaw, be sure to read the instructions from the manufacturer and follow all safety rules.

Chainsaw models

The general design of the saw did not change significantly over time, only individual parts were refined. The number at the end of the model name indicates its power, for example, Friendship 2 - 2 hp. In the first chainsaw produced, the handles were attached to the fan cover, later they were attached to a clamp that connected the gearbox and the engine. In the 4A model, produced before the 80s, a contact magneto and a KMP-100 carburetor were already used. Automatic chain lubrication was also introduced for the first time. Later it was discontinued and the 4A-Electron model with electronic ignition began to be produced instead.

Friendship model 4A

In the 90s, the old carburetor was replaced with a new KMP-100U. The chain saw became known as Friendship-4M and was equipped with updated chains. On the basis of the Druzhba chainsaw, the Ural saw with more powerful characteristics was developed. The last produced model with a similar design is Druzhba 5E.

Additional marking with the letter E or the word "Electron" means that an electronic ignition system is used in the chainsaw.

Characteristics

Friendship-2

Chainsaw Friendship-2This model became one of the most popular of the entire original series. The Druzhba-2 chainsaw operates due to a two-stroke single-cylinder engine with a power of about 2.2 kW and a rotation speed of 3200 rpm. Compared to the previous version, this one was performed better. The frame and handle are designed to prevent the user from getting burned by the hot engine. The body is made of high quality alloy that is not afraid of temperature extremes. Unlike the first model, this one already has a mechanical chain brake for safe use. In the event of a rebound or break, it will stop the chain. The saw was intended both for domestic needs and for professional felling. Weight 12.5 kg.

Friendship-4

Chainsaw Friendship-4The friendship 4 chainsaw uses the same engine as the previous model, but more power - 4 hp. or 2.94 kW. The engine and power unit are mounted using a flange connection secured with a clamp. The engine, if necessary (repair, replacement), can be easily removed in any conditions. On the basis of the Druzhba 4 saw, two modifications were made with markings 4A and 4E. The first included an automatic chain lubrication system, and the second used electronic ignition. The shortcomings of previous models were also taken into account, for example, the crankshaft bearing was strengthened. All versions were produced with an emergency braking system.

In the chainsaw friendship 4M-Electron, a similar engine with a power of 2.94 kW and a speed of 5200 rpm is used. The cylinder is made of an aluminum alloy, and the inside is chrome-plated for increased wear resistance.Unlike earlier versions, this chainsaw has a rotary gearbox that allows the saw unit to be rotated 60-90 ° for more convenient operation. The weight is evenly distributed throughout the body for maximum comfort. There is also a vibration damping device located between the steering wheel with handles, struts and the gas tank.

Chainsaw Friendship 4M-ElectronTo reduce the noise level, the saw is equipped with a silencer, and the noise level is 106 dB. A KMP-100U or KMP-100-AR carburetor is installed in the Druzhba 4M-Electron chainsaw. There are systems for automatic braking and saw chain lubrication. Weight 12.5 kg.

Friendship-5E

Chainsaw Friendship-5EThe latest released version of this series of chainsaws. Equipped with a 2-stroke single-cylinder engine with 5 hp. or 3.7 kW. Thanks to this, its performance is noticeably higher than that of previous models. Rotation speed 6200 rpm. At the same time, the level of the emitted noise is slightly lower than that of Druzhba-4M Electron, and is 105 dB. The weight of the 5E chainsaw is 800 g less - 11.7 kg.

Table with technical characteristics of Druzhba chainsaws:

Friendship-2 Friendship-4M Electron Friendship-5E
engine's type Single-cylinder, two-stroke, gasoline
power, kWt 2,2 2,94 3,7
Rotation frequency, rpm 3200 5200 6200
Bus length, cm 45
Launch type Manual
Automatic chain lubrication + +
Fuel tank volume, l 1,5
The volume of the tank of the lubricating system, ml 240
Electronic ignition + +
Weight without consumables, kg 12,5 12,5 11,7
Dimensions, cm (WxHxD) 46x50x86.5 46x46x88
Swing gear + +
Chain pitch, inch 0,404
Engine lubrication Gasoline mixed with oil

Advantages and disadvantages

Positive qualities of Druzhba chainsaws:

  • high productivity and the possibility of a long operating time without interruptions for 50 minutes;
  • simple construction;
  • the presence of high handles, thanks to which you can saw in a standing position, they also provide safer use and reduce the level of vibration;
  • accessible location of all parts;
  • the chain is driven by high engine speeds, at idle it is stationary;
  • low octane fuel can be used;
  • the presence of an emergency brake in most models;
  • if the saw chain gets stuck, the saw does not stall;
  • precise and even cut;
  • the service life, subject to the rules of operation and proper care, can be from 15 to 30 years.

The main drawback is the large weight. Also, due to the fact that the starter is removable, it is often lost and there is no Stop button.

Do not use leaded gasoline as fuel and do not run the saw in an enclosed space.

Repair tips

The main units of the chainsawThanks to the simple design, the repair of the Friendship chainsaw can be done by hand. So, for example, in saws of this brand, problems with ignition often occur, especially if a contact is installed. It is extremely sensitive to various oils and gasoline. Therefore, it is better to purchase electronic ignition instead. Moreover, the spare parts for the friendship chainsaw contact are expensive and irreplaceable.

If the candles are heavily flooded, then you should pay attention to the carburetor. In this case, it is necessary to slightly bend the gasoline valve inward, as a result, the amount of supplied fuel will decrease and the candles will stop getting wet.

The carburetor is also easily adjustable:

  1. The fuel screw is screwed in to the end and unscrewed back 3 turns.
  2. The propeller closes completely and turns off 2 turns.

To prevent air from being sucked into the system from the outside, all seals must be tight.

Domestic workerCompared to other models of the Druzhba chainsaw, it is sold for a lower price due to the small number of functions, but it has excellent quality and a long service life, which imported models cannot boast.

The main malfunctions of the chainsaw Friendship - video

Comments
  1. Konstantin

    Friendship with contact ignition is a reliable saw, it just happens that the construction of the insulator of the ignition coil cracks and breaks through - the saw either stalls or starts badly. Throwing out the insulator, pushing the armored wire, having previously wound electrical tape on it and wrapping it with force instead of the insulator, you control so as not to damage the petal of the ignition coil output. The spark is excellent after such a repair 5-10 mm. The horse will kill. You can use an oxygen hose as an insulator in diameter, pass the armored wire inside through the outside, grind it with emery in diameter with an interference fit and wrap it into the body. The carburetor works reliably if adjusted once. I inserted a rubber ring tightly inside the carburetor, cut it and fitted it tightly in diameter and inserted it inside the carburetor. I think to lubricate the chain from the rack with a hose with a weak spring valve and a ball or plastic valve washer. Exhaust gas pressure will be supplied to the tank cavity from above, the higher the engine speed, the more oil is supplied to the chain.

Garden

House

Equipment