Barbecue grill from car drive
In order to make a barbecue on your site, you can use an old car drive. Its diameter is ideal for grating installation. Such a brazier is made using a welding machine. To assemble it you will need:
- car drive;
- four iron corners;
- iron rod.
If the car rim is rusty, it must be primed or painted and then dried for several days. After painting, it is fixed on four legs, which are made from metal corners.
The corners can also be secured with window hinges and a few bolts by drilling holes for them in the disc body and feet. Thus, you will have a coal container. Self-made bbq barbecue in our next article!
Barbecue improvement
The factory holes of the disc are too large, so the container is turned over and welded with a metal rod or pieces of iron sheet.
In the event that you want to provide extra traction, use a metal bar.
Coarse coals will not fall out through the holes welded with the rod. Due to the strong wind, firewood and coal in such a grill completely burn out.
Due to the rather large gaps, the ash is blown out. The design can be improved by making a blower in place of several holes in the disc, and weld the rest tightly.
Around the perimeter of the car rim, you can make triangular slots for skewers using a grinder. For the stability of the structure - weld metal supports to the legs.
Advantages and disadvantages of the design
Since for the manufacture of such a barbecue installation, mainly old parts are used, the cost price barbecue minimal. You only need to purchase a primer or paint. All other materials can be found in their garage every motorist.
Also, the advantage of the barbecue is that the size of the charcoal bowl is ideal for a factory barbecue grill. You can use an oven grate, it is heat resistant and easy to clean.
The advantage of the barbecue is its weight and mobility. This barbecue unit can be easily moved around the site.
The disadvantages of a barbecue installation include a small bowl area. You cannot fry whole fish or a large piece of meat on such a grill. No more than four kebab skewers can be placed on the disc.
This flaw can be corrected by using a disc from a minibus or truck. Such a capacity will significantly increase the weight of the structure, and for stability you will have to use not four, but eight metal corners.